Avondale 2" x 8" Matte Brick Tile in Early Gray

  

Use only sanded grout with this product.

All spills must be cleaned immediately to prevent staining.

Do not use chlorine, acids, or other harsh chemicals to clean.

This handmade product may vary in sizing. Use a minimum 1/2" grout joint.

This product cannot be installed in showers, pools, spas, or waterline applications.

This product may be installed near or on the face of high-heat areas, but not inside.

These tiles are handmade and subject to color variation. Mix randomly from different boxes to balance variation.

Wet the back of the tile prior to setting. Apply mortar to both the substrate and the back of the brick tile using a 1/2" notched trowel.

Brick tiles must be sealed before and after grouting to prevent penetration. Seal grout joints as well. For a low sheen, Master Seal 100 by Desert Brand is the recommended topical sealer. For a matte finish, use a high quality penetrating sealer.

Merchandising materials and samples are for general reference only and representative of a product's potential characteristics. Tile is subject to variation in color/shade, size, texture, and finish. Field, mosaic and trim tile may not match exactly. Blend tiles from different boxes to achieve consistent shade distribution. Installer and end user must conduct a dry mock layout under proper lighting conditions to inspect the product. Installation constitutes acceptance of the product. Reference the TCNA, ANSI, Manufacturer's specifications, and Bedrosians Care & Maintenance Guide. Improper installation, application, use, care and maintenance voids warranty. We reserve the right to make product changes without notice.